To create a microphone for your phone using the method described, you can repurpose parts from an older telephone, specifically a rotary type. This process focuses on extracting and preparing the microphone component from the vintage device.
Steps to Create a Phone Microphone from an Old Rotary Phone
The core idea is to utilize the existing microphone found within an older phone handset. Here's a breakdown of the process based on the provided information:
- Get a Phone: Begin by acquiring a suitable phone. The reference suggests that older rotary types are the best for this purpose, implying their microphone components are ideal.
- Junk the Body: Once you have the phone, you will need to disassemble it and discard the main body of the handset, keeping only the necessary parts for the microphone.
- Identify the Microphone: Locate the microphone component within the handset. It will be identifiable by two wires coming out of the back. These wires are essential for connecting the microphone.
- Thread the Mic Cable: Take the cable attached to the microphone (or its wires) and thread it through the opening in the handset that was originally used for the coiled phone cord. This organises the wires/cable for potential future connection.
This method provides you with the microphone element extracted and prepared from an old phone handset.
Required Materials
- An old rotary phone (recommended)
- Basic tools for disassembly (not explicitly mentioned but implied)
Following these steps will yield the raw microphone component from a vintage phone, ready for potential adaptation or connection.
