To turn off your Jabra Elite 7 Active earbuds, you have two primary methods: placing them in their charging case or manually pressing both earbud buttons simultaneously.
Quick Guide to Powering Your Jabra Elite 7 Active
The table below provides a quick overview of how to manage the power state of your Jabra Elite 7 Active earbuds.
| Action | Method | Indicator |
|---|---|---|
| Turn Off | Place earbuds in the charging case | Earbuds power down automatically |
| Turn Off | Simultaneously press Left and Right buttons | Earbuds power down |
| Turn On | Press and hold (1 second) Left or Right button | Earbud LEDs flash green to indicate power on |
Detailed Methods for Turning Off Your Earbuds
You can easily power down your Jabra Elite 7 Active earbuds using either the convenient charging case or a manual button press.
Method 1: Using the Charging Case (Recommended)
This is the most common and straightforward way to turn off your earbuds. When placed in the charging case, your earbuds will automatically power down and begin charging, ensuring they're ready for your next use.
- Open the Charging Case: Ensure your Jabra Elite 7 Active charging case is open.
- Insert Earbuds: Carefully place both the Left and Right earbuds into their respective slots within the charging case.
- Close the Case: Close the lid of the charging case. The earbuds will automatically turn off.
Method 2: Manual Shutdown
If your charging case isn't readily available or if you prefer to power them down while they're out of the case, you can use the manual shutdown method.
- Locate Buttons: Identify the physical buttons on both your Left and Right Jabra Elite 7 Active earbuds.
- Press Simultaneously: Press and hold the buttons on both the Left and Right earbuds at the same time.
- Release: Hold until the earbuds indicate they are powering off (e.g., an audio prompt or LED change, though the reference specifies just "to turn off").
How to Manually Turn On Your Jabra Elite 7 Active Earbuds
Should you need to manually turn on your earbuds, especially if they are outside their charging case, follow these simple steps:
- Identify Buttons: Locate the button on either the Left or Right earbud.
- Press and Hold: Press and hold the button on one of the earbuds for approximately 1 second.
- Observe LED: The earbud's LED will flash green, indicating that it has been turned on. Repeat for the other earbud if both need to be manually powered on.
Tips for Optimal Earbud Usage
For the best experience, regularly use the charging case to store and power off your Jabra Elite 7 Active earbuds. This keeps them charged and ensures they are always ready for your calls or music. For more detailed support and information, you can always refer to the official Jabra Support Page.
