To turn on your Razer Hammerhead Pro earbuds, the primary method involves a simple touch panel interaction, with a reliable alternative using the charging case if needed.
Powering On Your Razer Hammerhead Pro Earbuds
Your Razer Hammerhead Pro earbuds can be activated through two main methods, ensuring you can always get them ready for use.
Standard Power-On Method
The most common way to turn on your earbuds is directly through their touch-sensitive panels.
- Step 1: Press and Hold
Locate the touch panel on each individual earbud. - Step 2: Activate
Press and hold the touch panel on each earbud for approximately two seconds. You should notice an indication (like an LED light or an audio cue) that they have powered on.
Alternative Power-On (Using the Charging Case)
If the standard method doesn't seem to work, or if your earbuds were recently powered off, you can use the charging case to easily turn them on.
- Step 1: Place in Charging Case
Carefully place both Razer Hammerhead Pro earbuds back into their designated slots within the charging case. - Step 2: Wait Briefly
Close the charging case and wait for at least five seconds. This allows the earbuds to reset or establish a connection with the case. - Step 3: Open Case to Activate
Open the charging case. The earbuds should automatically power on and be ready for use, often indicated by their status lights.
Quick Reference Guide
This table summarizes the methods for powering on your Razer Hammerhead Pro earbuds:
| Method | Action | Expected Outcome |
|---|---|---|
| Touch Panel (Primary) | Press and hold the touch panel on each earbud for 2 seconds. | Earbuds power on, ready for connection. |
| Charging Case (Alternative) | Place both earbuds in the case for 5 seconds, then open the lid. | Earbuds power on automatically. |
For more detailed information on your device, you can refer to the official Razer Support pages or the Razer Hammerhead Pro product guide.
