To turn off the back wiper in your Ford Figo, locate the wiper control stalk (typically on the right side of your steering wheel) and rotate the outer collar or ring on the stalk to the "OFF" position.
Understanding Your Ford Figo's Wiper Controls
The wiper control stalk in your Ford Figo is a multi-functional lever designed to manage both front and rear wipers, along with their respective washer functions. While the stalk handles various operations—including rotating it forward and backward to change the intensity of the front wipers, and holding it either all the way forward or all the way back to activate the window washer—the rear wiper has its own dedicated activation and deactivation mechanism, often integrated into the same stalk.
Step-by-Step Guide to Turning Off the Rear Wiper
Follow these simple steps to deactivate the rear wiper in your Ford Figo:
- Locate the Wiper Stalk: The primary control for all wipers is typically found on the right side of your steering column.
- Identify the Rear Wiper Control: On the main wiper stalk, you will usually find a separate collar or ring that specifically controls the rear wiper. This control often has clear markings for "OFF," "Intermittent," and "ON."
- Rotate to "OFF": Gently twist this collar or ring until it aligns with the "OFF" position. This action will immediately stop the rear wiper.
- Tip: If you're unsure of the exact positions or markings, always refer to your Ford Figo's owner's manual for a detailed diagram and specific instructions for your model year.
Common Rear Wiper Settings
Most Ford Figo models offer a few standard settings for the rear wiper, controlled by the dedicated collar on the stalk:
- OFF: The wiper is completely inactive.
- Intermittent (INT): The wiper operates with a delay between sweeps, suitable for light rain or mist.
- ON (Continuous): The wiper operates continuously for heavier rain or when consistent clearing is needed.
Wiper Control Stalk Overview
To better understand the various functions of your Figo's wiper stalk, here's a general overview:
| Control Action | Function | Applies To |
|---|---|---|
| Rotate Collar/Ring to "OFF" | Deactivates rear wiper | Rear Wiper |
| Rotate Collar/Ring to "INT" or "ON" | Activates rear wiper (intermittent or continuous) | Rear Wiper |
| Rotate stalk forward and backward | Changes front wiper intensity (intermittent speed) | Front Wiper |
| Hold stalk all the way forward or all the way back | Activates window washer fluid | Front and/or Rear Washer |
| Push Stalk Away From You (often) | Activates rear window washer | Rear Washer |
Note: The italicized entries reflect general multi-wiper stalk information and demonstrate how different functions are integrated.
Troubleshooting and Best Practices
- Frozen Wiper Blades: Never attempt to force a frozen wiper blade. Doing so can damage the wiper motor, linkages, or the blade itself. Always allow your rear window to defrost thoroughly before attempting to operate the wiper in freezing conditions.
- Blade Condition: Regularly inspect your wiper blades for signs of wear, cracking, or perishing. Worn blades can leave streaks, reduce visibility, and scratch the glass. Replace them promptly when needed.
- Washer Fluid: Ensure your washer fluid reservoir is always topped up. Use a high-quality washer fluid, especially one formulated for colder climates during winter, to prevent freezing and ensure effective cleaning.
For further detailed instructions and model-specific information, always consult your Ford Figo's official owner's manual. You can often find digital versions directly on the Ford website.
