To get your Beachcomber hot tub out of EC (Economy) mode and return to Standard mode, the specific steps depend on your hot tub series.
Understanding Beachcomber Hot Tub Modes
Beachcomber hot tubs offer various operating modes designed to manage energy consumption and heating schedules. Understanding these modes helps you optimize your hot tub experience:
- Economy Mode (EC/Sleep): In this mode, your hot tub will typically only heat the water during its programmed filter cycles. This is an energy-saving setting, as it avoids constant heating, which can be beneficial during periods of infrequent use or when energy conservation is a priority. However, it means the water temperature might drop between cycles, and it will take longer to reach your set temperature for spontaneous use.
- Standard Mode: This is the default or most common operating mode. In Standard mode, your hot tub consistently heats the water to your desired set temperature and maintains it around the clock. This ensures your hot tub is always ready for use, providing consistent warmth and immediate enjoyment.
Why Switch Out of Economy Mode?
While Economy mode is great for saving energy, switching to Standard mode offers several advantages:
- Consistent Temperature: Your hot tub will maintain your preferred water temperature continuously, eliminating the wait for heating cycles.
- Instant Readiness: Enjoy your hot tub anytime without checking if it's warm enough.
- Faster Recovery: The water will reheat quicker after use, especially during colder weather.
- Optimal for Frequent Use: Ideal if you use your hot tub regularly and want maximum convenience.
Step-by-Step Guide to Exiting EC Mode
The method to switch from Economy or Sleep mode back to Standard mode varies based on your specific Beachcomber hot tub series. Follow the instructions below that match your model:
| Beachcomber Hot Tub Series | Steps to Exit EC Mode |
|---|---|
| 300/500 Series | Press the Temp button, then immediately press the Light button. |
| 700 Series | Press EITHER the Warm or Cool temperature button, then press the Mode button. |
What Happens After Switching?
Once you've successfully changed the mode, your hot tub's control panel display should no longer show "EC," "Econ," or "SLP." Your hot tub will then begin heating to and maintaining your set temperature continuously, providing a more consistent and ready-to-use experience. The heater will cycle on and off as needed to keep the water at your desired temperature.
General Tips for Hot Tub Mode Management
- Consult Your Manual: For detailed, model-specific instructions and a full understanding of all control panel functions, always refer to your Beachcomber owner's manual. Digital copies are often available on the official Beachcomber Hot Tubs website.
- Monitor Display: Pay attention to your hot tub's display panel for any mode indicators (e.g., "EC," "SLP"). If no such indicator is present after following the steps, your hot tub is likely in Standard mode.
- Power Cycle (If Needed): If you've followed the steps and the mode doesn't seem to change, you can try a brief power cycle. Turn off the hot tub's power at the main breaker for a few minutes, then restore power. This can sometimes reset the system and resolve minor display or control issues.
Frequently Asked Questions (FAQs)
How can I tell if my hot tub is in Economy mode?
Your hot tub's control panel display will typically show an indicator such as "EC," "Econ," or "SLP" (Sleep) when it is operating in Economy mode. If no such indicator is present, it's generally in Standard mode.
What is the primary benefit of Standard Mode?
The primary benefit of Standard Mode is that your hot tub will always be heated to your set temperature and ready for use at any time, providing maximum convenience and consistent enjoyment.
