To activate your B-hyve timer and initiate its operation, the primary step involves correctly installing its power source.
Initial Power-Up and Pairing Mode
The most fundamental way to "turn on" your B-hyve smart hose tap timer is by providing it with power through battery insertion. This action immediately initiates the device's startup sequence and places it into pairing mode, ready for setup.
- Insert Two AA Batteries: Locate the battery compartment on your B-hyve timer (often found on the back or bottom of the device). Carefully insert two fresh AA batteries, ensuring that their positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Upon successful battery insertion, your timer will automatically enter pairing mode.
- You will observe a blue light flashing approximately every 5 seconds. This visual cue indicates that the timer is actively seeking a connection to a Wi-Fi hub or other compatible device for setup.
- Additionally, you will hear two distinct clicks about 6 seconds apart. This sound is completely normal and serves as an internal check, confirming that the valve is closed and prepared for operation before you connect your water source.
Understanding the On/Off Button
While there is an on/off button on the B-hyve timer, its primary function is not for a general daily power toggle. Instead, its main utility, as related to power and connectivity, is for re-pairing the device.
- For Re-pairing: If at any point you need to re-initiate the pairing process—perhaps due to a network change or a need to re-establish connection—you can quickly press the on/off button five times. This action helps to reset the timer's pairing state, allowing it to search for and connect to your B-hyve Wi-Fi Hub or other controlling device again.
Key Takeaways for Turning On:
- The act of inserting the batteries is the foundational step for powering on and activating the B-hyve timer.
- The timer automatically enters pairing mode upon battery insertion, signaled by a flashing blue light.
- Audible clicks confirm the internal valve's readiness.
Battery Information
For optimal performance and reliable operation of your B-hyve timer, it's crucial to use the correct battery type and quantity.
| Feature | Detail |
|---|---|
| Battery Type | AA (Alkaline batteries are generally recommended for best results) |
| Quantity | 2 |
| Initial Action | Powers on the device and initiates pairing mode |
For further information and support, you can visit the official Orbit B-hyve website.
